- This is the over-bath shower solution if you have 20mm pipes coming from your wall, and are looking for a bath filler with the ability to divert to a handshower. Includes a wall bracket so that the handshower can be mounted at a suitable height above the bath. Although this mixer comes standard as mains pressure only, for an extra cost, the diverter can be altered by our engineer to lock even on low pressure.
- Installed with a quality European cartridge.
- This mixer comes with 20mm chrome eccentrics. [Eccentrics, pictured separately, provide flexibility to account for different distances between your hot and cold pipes. Our mixers have a distance of 150mm between the centre of the cold pipe and the centre of the hot pipe, but your pipes from the wall might be a bit more or less than that. Our chrome eccentrics allow for your pipework to be up to 204mm apart (centre to centre) or as close as 96mm apart.] (These eccentrics connect to your 20mm pipes coming out of the wall.
- If your pipes coming out of the wall are 15mm, then simply order the same code but with "15" on the end, and we'll supply with 15mm eccentrics).
- If, instead of wall-mounting the mixer, you'd prefer to mount it on a horizontal surface (hob-mounted), then you can purchase a pair of special hob mounts NV TELEM20, which you would use instead of the eccentrics.
More details and BPIR (if applicable) can be found here »
| Specifications | Download |
